Prices for our gas training and assessments are calculated based on work areas selected. Please call us to discuss your particular needs.
Course Outline
Work Areas:
Commercial Core Options:
CoCDN1 - Changeover from commercial natural gas to domestic natural gas
COCN1 - Core commercial gas safety assessment criteria
COCNPI1LS - Core commercial gas safety criteria pipe installer/commissioner
CoDNCO1 - Changeover domestic natural gas to commercial
Commercial Appliances Options:
CDGA1 - Install, commission, service, repair and breakdown of commercial direct fired heating appliances and equipment
CIGA1 - Install, commission, service, repair and breakdown of commercial indirect fired heating appliances and equipment
CORT1 - Install, commission, service, repair and breakdown of gas fired commercial overhead luminous radiant plaque and radiant tube heaters
ICAE1LS - Limited scope operative installation first fix of commercial appliances/equipment
ICPN1 - Installation of commercial pipework (first fix)
ICPN1LS - Limited scope operative installation of commercial pipework (first fix)
REGT1 - Installation, testing and commissioning domestic medium pressure meter regulators and controls
TPCP1 - Testing and purging commercial pipework to the requirements of IGE/UP/1
TPCP1A - Testing and purging commercial pipework to the requirements of IGE/UP/1A
Who should attend?
This course is suitable for engineers who have the necessary qualifications to be admitted onto the ACS Scheme. Run by the Strategic Management Board for the industry, successful completion of this course will enable an engineer to register with Gas Safe.
Engineers are classified into 2 categories:
- Category 1 – Experienced practicing gas fitting operative
- Category 2 – Applicant with relevant mechanical engineering/fitting qualifications/experience
Note: Successful completion of the Commercial Catering Core Gas Safety qualification is a pre-requisite before gas engineers can undertake additional assessment on commercial natural gas fuelled installations and appliances.
Learning Outcomes
Commercial appliance controls
Commercial core gas safety is the pre-requisite knowledge base and covers the essential core gas skills needed to undertake work on commercial natural gas fired domestic installations.
- Gas safety regulations, Building Regulations, British Standards and other related legislation
- Unsafe situations and emergency actions
- Gas pipework (including sizing, installation, defects and faults)
- Tightness testing principles, pipe volume, purge volumes
- Flues and ventilation
- Combustion
- Combustion Performance Analysis (flue gas testing)
Commercial appliance controls
Covers all aspects of gas safety relating to the installation, commissioning and servicing of commercial gas appliances.
- Gas safety regulations, Building Regulations, British Standards and other related legislation
- Unsafe situations and emergency actions
- Gas pipework (including sizing, installation, defects and faults)
- Strength testing, tightness testing and purging principles
- Calculation of pipe volume and purge volumes
- Flues and ventilation
- Combustion
- Combustion Performance Analysis (flue gas testing)
- Commercial appliance controls
Additional Information
On the day, you will need to bring the following with you:
- 2 x Passport sized photographs
- Original copies of expired/expiring ACS qualifications
- Note-taking material (recording devices not allowed)
Optional (provided):
- Calculator (not part of a smart phone application)
- Commercial Gas Safety On-Site Guide (supplied to use throughout training free of charge)
We will also provide a copy of the NICEIC Non-Domestic On-site Guide for use throughout the training. If you would like to purchase your own copy you can do so by clicking here.
Note: Training is not a pre-requisite to assessment